INVISIBL GLOVE PR88

PR88 Invisible Glove is a protective skin cream against all kinds of dirt caused by oil, grease , paint, lacquer , tar, adhesives, fiberglass, polyester pasta , pasta silicone , polyurethane , soot , dust, etc. .

It is a fully tested and certified by the Ministry of Health and Consumption in conjunction with the General Directorate of Pharmaceuticals and Medical Devices product.

Instructions:
1. Apply to hands an amount equivalent to a walnut and rub before work, let it dry for 1 minute.
Two . Work normally .
Three . Flush with water disappearing dirt along with the protective film.



PR88 is a protective water-based cream is applied before starting work. Provides a non-greasy , non-sticky barrier against alcohol based substances like gasoline and coal , diesel, oil, paint , resins , solvents , fiberglass , adhesives, inks, etc. . Toxins dare absorbing skin is delayed and sometimes prevented. PR88 is not transferred from your hands to surfaces that have contact once it is completely dry (about 1 minute) and thus do not contaminate your workpieces. It is not toxic , it is hypoallergenic , biodegradable in 85 % , and can be applied on damaged, neck, face and other body parts skin, dermatologically tested .

BENEFITS
Delaying the absorption of solvents and toxins on the skin , prevents damage to internal organs long term . It can be cleaned with warm or cold without the use of soaps in water approx . 10-20 seconds.

IMPACT ON OPERATING COST
Using PR88 for more than 25 years in the workplace demonstrates a significant reduction in the time required by workers to clean (up to 90 %). Proving PR88 is removed with plain water instantly with reductions of up to 95 % in water use have been recorded .